Raytheon ST6000 Plus Specifiche Scaricare il pdf (Pagina 65)

52 ST6000 Plus Autopilot Control Unit Owner,s Handbook

4. Screw the fixing studs (2) into the display head.

5. Pass the cables (SeaTalk, NMEA) through the bulkhead.

6. Fit the cables to the appropriate terminals (see relevant subsection

for connection details of each item)

7. Fit the display head to the bulkhead.

8. Assemble the thumb nuts (3) onto the fixing studs (2).

9. Tighten the thumb nuts by hand until the display head is secure.

Under no circumstances must wrenches be used to tighten the

thumb nuts.

Connections to the SeaTalk bus

SeaTalk cables

The ST6000 Plus is supplied with a 9m SeaTalk cable as standard.

The following table lists other cables available from your dealer:

Part No: Type Length

D187 Flat to a male round connector 0.15 m (6 in) long

D188 Flat to a female round connector 0.3 m (12 in) long

D284 Flat moulded plugs at both ends 1 m (3 ft 3 in) long

D285 Flat moulded plugs at both ends 3 m (9 ft 9 in) long

D286 Flat moulded plugs at both ends 6 m (19 ft 6 in) long

D287 Flat moulded plugs at both ends 9 m (29 ft 3 in) long

Cable types

The following illustration shows the different types of SeaTalk cables

available.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 94 95

Nessun commento

Raytheon ST6000 Plus Specifiche Pagina 65